Show System Statistics Arp - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show system statistics arp

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
Sample Output
2998
®
OS for EX Series Ethernet Switches, Release 10.3
show system statistics arp
Command introduced in Junos OS Release 9.6 for EX Series switches.
Display system-wide Address Resolution Protocol (ARP) statistics.
view
Example: Configuring Proxy ARP on an EX Series Switch on page 2901
Verifying That Proxy ARP Is Working Correctly on page 1406
user@switch> show system statistics arp
arp:
90060 datagrams received
34 ARP requests received
610 ARP replies received
0 resolution request
0 unrestricted proxy requests
0 restricted proxy requests
0 received proxy requests
0 unrestricted proxy requests not proxied
0 restricted proxy requests not proxied
0 datagrams with bogus interface
0 datagrams with incorrect length
0 datagrams for non-IP protocol
0 datagrams with unsupported op code
0 datagrams with bad protocol address length
0 datagrams with bad hardware address length
0 datagrams with multicast source address
0 datagrams with multicast source address
0 datagrams with my own hardware address
0 datagrams for an address not on the interface
0 datagrams with a broadcast source address
294 datagrams with source address duplicate to mine
89113 datagrams which were not for me
0 packets discarded waiting for resolution
0 packets sent after waiting for resolution
309 ARP requests sent
35 ARP replies sent
0 requests for memory denied
0 requests dropped on entry
0 requests dropped during retry
0 requests dropped due to interface deletion
0 requests on unnumbered interfaces
0 new requests on unnumbered interfaces
0 replies for from unnumbered interfaces
0 requests on unnumbered interface with non-subnetted donor
0 replies from unnumbered interface with non-subnetted donor
received
Copyright © 2010, Juniper Networks, Inc.