Table 327: Show Pim Join Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Copyright © 2010, Juniper Networks, Inc.
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast

Table 327: show pim join Output Fields

Field Name Field Description
Name of the routing instance.
Instance
Name of the address family:
Family
Rendezvous Point Tree
R
Sparse
S
Wildcard
W
Group address.
Group
Multicast source:
Source
(wildcard value)
*
ipv4-address
ipv6-address
Rendezvous point for the PIM group.
RP
Flags PIM flags:
dense
rptree
sparse
—Entry is on the shortest-path tree for the source.
spt
wildcard
RPF interface toward the source address for the source-specific state
Upstream interface
toward the rendezvous point (RP) address for the non-source-specific state
.
(* , G)
Information about the upstream neighbor:
Upstream neighbor
IP address.
Information about the upstream interface:
Upstream state
Join to RP
Join to Source
Local RP
is the rendezvous point.
Local Source
the source is locally attached to this routing device.
Prune to RP
Prune to Source
(IPv4) or
inet
—Dense mode entry.
—Entry is on the rendezvous point tree.
—Sparse mode entry.
—Entry is on the shared tree.
—Sending a join to the rendezvous point.
—Sending a join to the source.
—Sending neither joins nor prunes toward the RP, because this router
—Sending neither joins nor prunes toward the source, because
—Sending a prune to the rendezvous point.
—Sending a prune to the source.
(IPv6).
inet6
(S, G)
, , , or a specific
Direct Local Unknown
2497
or