Vendor-Id - Juniper JUNOS OS 10.3 - SOFTWARE Manual

vendor-id

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
vendor-id <string>;
[edit ethernet-switching-options secure-access-port vlan (all | vlan-name) dhcp-option82]
[edit forwarding-options helpers bootp dhcp-option82]
[edit forwarding-options helpers bootp interface interface-name dhcp-option82]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Insert a vendor ID in the DHCP option 82 information in a DHCP request packet header
before forwarding or relaying the request to a DHCP server.
If vendor-id is not explicitly configured for DHCP option 82, no vendor ID is set.
—(Optional) A single string that designates the vendor ID.
string
Range: 1–255 characters
Default: If you specify
vendor-id
configured.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Setting Up DHCP Option 82 on an EX Series Switch with No Relay Agent
Between Clients and DHCP Server on page 2898
Example: Setting Up DHCP Option 82 with an EX Series Switch as Relay Agent Between
Clients and a DHCP Server on page 2895
Setting Up DHCP Option 82 on the Switch with No Relay Agent Between Clients and
DHCP Server (CLI Procedure) on page 2929
Setting Up DHCP Option 82 with the Switch as a Relay Agent Between Clients and
DHCP Server (CLI Procedure) on page 2926
[edit forwarding-options] Configuration Statement Hierarchy on page 51
Chapter 98: Configuration Statements for Port Security
with no value, the default vendor ID
string
is
Juniper
2981