Show Poe Controller; Table 446: Show Poe Controller Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show poe controller

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
3340
®
OS for EX Series Ethernet Switches, Release 10.3
show poe controller
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display configuration and status of the PoE controller.
view
show poe interface on page 3342
Verifying PoE Configuration and Status (CLI Procedure) on page 3322
Monitoring PoE Power Consumption (CLI Procedure) on page 3320
Troubleshooting PoE Interfaces on page 3325
show poe controller on page 3341
Table 446 on page 3340 lists the output fields for the
fields are listed in the approximate order in which they appear.

Table 446: show poe controller Output Fields

Field Name Field Description
Controller number.
Controller index
Maximum power that the switch can provide to the PoE ports.
Maximum power
Total amount of power being used by the PoE ports at the time the command
Power
is executed.
consumption
Amount of power that has been placed in reserve for power demand spikes and
Guard Band
that cannot be allocated to a PoE interface.
Management Power management mode: either
command. Output
show poe controller
Static or Class .
Copyright © 2010, Juniper Networks, Inc.