Query-Last-Member-Interval - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

query-last-member-interval

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
2396
®
OS for EX Series Ethernet Switches, Release 10.3
query-last-member-interval seconds;
[edit protocols igmp-snooping vlan vlan-id | vlan-name]
Statement introduced in Junos OS Release 9.1 for EX Series switches.
Statement deprecated in Junos OS Release 9.4 for EX Series switches.
NOTE: This statement has been deprecated and might be removed from
future product releases. We strongly recommend that you phase out its use.
Configure the interval between group-specific query timeout messages sent by the switch.
1 second.
—Amount of time between group-specific query timeout messages.
seconds
Range: 1 though 1024 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring IGMP Snooping on EX Series Switches on page 2323
Configuring IGMP Snooping (CLI Procedure) on page 2331
Copyright © 2010, Juniper Networks, Inc.