Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2668

Complete Software Guide for Junos
Results
Verification
Purpose
Action
2572
®
OS for EX Series Ethernet Switches, Release 10.3
[edit protocols]
user@switch# set dot1x authenticator interface ge-0/0/9 supplicant single-secure
Configure multiple supplicant mode on interface
3.
[edit protocols]
user@switch# set dot1x authenticator interface ge-0/0/11 supplicant multiple
Check the results of the configuration:
[edit]
user@access-switch> show configuration
protocols {
dot1x {
authenticator {
interface {
ge-0/0/8.0 {
supplicant single;
)
ge-0/0/9.0 {
supplicant single-secure;
)
ge-0/0/11.0 {
supplicant multiple;
)
}
}
}
}
To confirm that the configuration is working properly, perform these tasks:
Verifying the 802.1X Configuration on page 2572
Verifying the 802.1X Configuration
Verify the 802.1X configuration on interfaces
Verify the 802.1X configuration with the operational mode command
user@switch> show dot1x interface ge-0/0/8.0 detail
ge-0/0/8.0
Role: Authenticator
Administrative state: Auto
Supplicant mode: Single
Number of retries: 3
Quiet period: 60 seconds
Transmit period: 30 seconds
Mac Radius: Disabled
Mac Radius Restrict: Disabled
Reauthentication: Enabled
Configured Reauthentication interval: 3600 seconds
Supplicant timeout: 30 seconds
Server timeout: 30 seconds
ge-0/0/11 :
, , and
ge-0/0/8 ge-0/0/9
show dot1x interface
Copyright © 2010, Juniper Networks, Inc.
.
ge-0/0/5
: