Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3018

For ex series ethernet switches
Hide thumbs Also See for JUNOS OS 10.3 - SOFTWARE:
Table of Contents

Advertisement

Complete Software Guide for Junos
Related
Documentation
Setting the none Action on an Interface to Override a MAC Limit Applied to All Interfaces
(CLI Procedure)
Related
Documentation
2922
®
OS for EX Series Ethernet Switches, Release 10.3
Click
.
3.
OK
Click
after the configuration has been successfully delivered.
OK
5.
NOTE: You can enable or disable port security on the switch at any time by
clicking the
Activate
page. If security status is shown as
any VLANs, a message asking whether you want to enable port security
appears.
Configuring MAC Move Limiting (CLI Procedure) on page 2919
Example: Configuring Port Security, with DHCP Snooping, DAI, MAC Limiting, and MAC
Move Limiting, on an EX Series Switch on page 2849
Verifying That MAC Move Limiting Is Working Correctly on page 2941
Monitoring Port Security on page 2933
Understanding MAC Limiting and MAC Move Limiting for Port Security on EX Series
Switches on page 2838
If you set a MAC limit in your port security settings to apply to all interfaces on the EX
Series switch, you can override that setting for a particular interface by specifying action
.
none
To use the
action to override a MAC limit setting:
none
Set the MAC limit—for example, a limit of
1.
[edit ethernet-switching-options secure-access-port]
user@switch# set interface all mac-limit 5 action drop
Then change the action for one interface (here,
2.
don't need to specify a limit value.
[edit ethernet-switching-options secure-access-port]
user@switch# set interface ge–0/0/2 mac-limit action none
Configuring MAC Limiting (CLI Procedure) on page 2915
Configuring MAC Limiting (J-Web Procedure) on page 2917
Example: Configuring Port Security, with DHCP Snooping, DAI, MAC Limiting, and MAC
Move Limiting, on an EX Series Switch on page 2849
Verifying That MAC Limiting Is Working Correctly on page 2937
or
button on the Port Security Configuration
Deactivate
Disabled
when you try to edit settings for
with action
5
ge-0/0/2
Copyright © 2010, Juniper Networks, Inc.
:
drop
) with this command. You

Advertisement

Table of Contents
loading

Table of Contents