Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2563

show multicast show multicast
interface interface
Copyright © 2010, Juniper Networks, Inc.
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
Table 315: show multicast interface Output Fields (continued)
Field Name
Local bandwidth deduction
(bps)
Reverse OIF mapping
Reverse OIF mapping no
QoS adjustment
Leave timer
No QoS adjustment
user@host> show multicast interface
Interface
fe-0/0/3
fe-0/0/3.210
fe-0/0/3.220
fe-0/0/3.230
fe-0/0/2.200
Field Description
Amount of bandwidth, in bits per second, used by any mapped flows
that are traversing the interface.
NOTE: Adding the mapped bandwidth deduction value to the local
bandwidth deduction value results in the total deduction value for
the interface.
This field does not appear in the output when the no QoS
adjustment feature is disabled.
State of the reverse OIF mapping feature (
NOTE: This field does not appear in the output when the no QoS
adjustment feature is disabled.
State of the no QoS adjustment feature (
that are using reverse OIF mapping.
NOTE: This field does not appear in the output when the no QoS
adjustment feature is disabled.
Amount of time a mapped interface remains active after the last
mapping ends.
NOTE: This field does not appear in the output when the no QoS
adjustment feature is disabled.
State ( on ) of the no QoS adjustment feature when this feature is
enabled.
NOTE: This field does not appear in the output when the no QoS
adjustment feature is disabled.
Maximum bandwidth (bps) Remaining bandwidth (bps)
10000000
10000000
100000000
20000000
100000000
or ).
on off
or ) for interfaces
on off
0
–2000000
100000000
18000000
100000000
2467