Complete Software Guide for Junos
show multicast interface
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
2466
®
OS for EX Series Ethernet Switches, Release 10.3
show multicast interface
<logical-system (all | logical-system-name)>
show multicast interface
Command introduced in Junos OS Release 8.3.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display bandwidth information about IP multicast interfaces.
—Display all interfaces that have multicast configured.
none
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show multicast interface on page 2467
Table 315 on page 2466 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.
Table 315: show multicast interface Output Fields
Field Name
Interface
Maximum bandwidth (bps)
Remaining bandwidth
(bps)
Mapped bandwidth
deduction (bps)
—(Optional) Perform this operation on all logical
Field Description
Name of the multicast interface.
Maximum bandwidth setting, in bits per second, for this interface.
Amount of bandwidth, in bits per second, remaining on the interface.
Amount of bandwidth, in bits per second, used by any flows that
are mapped to the interface.
NOTE: Adding the mapped bandwidth deduction value to the local
bandwidth deduction value results in the total deduction value for
the interface.
This field does not appear in the output when the no QoS
adjustment feature is disabled.
show multicast interface
Copyright © 2010, Juniper Networks, Inc.