Transmit-Period; Update-Interval - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

transmit-period

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation

update-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2740
®
OS for EX Series Ethernet Switches, Release 10.3
transmit-period seconds;
[edit protocols dot1x authenticator interface (all | [interface-name])
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For 802.1X authentication, how long the port waits before retransmitting the initial EAPOL
PDUs to the supplicant.
30 seconds
seconds—Number of seconds the port waits before retransmitting the initial EAPOL PDUs
to the supplicant.
Range: 1 through 65,535 seconds
Default: 30 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring 802.1X Interface Settings (CLI Procedure) on page 2609
802.1X for EX Series Switches Overview on page 2531
update-interval minutes;
[edit access profile profile-name accounting]
Statement introduced in Junos OS Release 9.1.
Statement introduced in Junos OS Release 9.1 for EX Series switches.
Configure the amount of time that the router or switch waits before sending a new
accounting update.
—Amount of time between updates, in minutes.
minutes
Range: 10 through 1440 minutes
Default: No updates
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Configuring Authentication and Accounting Parameters for Subscriber Access
Copyright © 2010, Juniper Networks, Inc.