Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2683

Meaning
Purpose
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.
ge-0/0/1.0 0
ge-0/0/2.0 0
ge-0/0/2.0 99
ge-0/0/3.0 0
ge-0/0/8.0 0
ge-0/0/10.0 0
ge-0/0/11.0 20
ge-0/0/23.0 0
LLDP basic TLVs supported:
Chassis identifier, Port identifier, Port description, System name, System
description, System capabilities, Management address.
LLDP 802 TLVs supported:
Power via MDI, Link aggregation, Maximum frame size, Port VLAN tag, Port
VLAN name.
LLDP MED TLVs supported:
LLDP MED capabilities, Network policy, Endpoint location, Extended power
Via MDI.
The show lldp detail output shows that both LLDP and LLDP-MED are configured on the
interface. The end of the output shows the list of supported LLDP basic TLVs,
ge-0/0/2.0
802.3 TLVs, and LLDP-MED TLVs that are supported.
Verifying 802.1X Authentication for IP Phone and Desktop PC
Display the 802.1X configuration to confirm that the VoIP interface has access to the
LAN.
user@switch> show dot1x interface ge/0/0/2.0 detail
ge-0/0/2.0
Role: Authenticator
Administrative state: Auto
Supplicant mode: Multiple
Number of retries: 3
Quiet period: 60 seconds
Transmit period: 30 seconds
Mac Radius: Disabled
Mac Radius Restrict: Disabled
Reauthentication: Enabled
Configured Reauthentication interval: 3600 seconds
Supplicant timeout: 30 seconds
Server timeout: 30 seconds
Maximum EAPOL requests: 2
Guest VLAN member: <not configured>
Number of connected supplicants: 1
Supplicant: user101, 00:04:0f:fd:ac:fe
Operational state: Authenticated
Authentication method: Radius
Authenticated VLAN: vo11
Dynamic Filter: match source-dot1q-tag 10 action deny
Session Reauth interval: 60 seconds
Reauthentication due in 50 seconds
The field Role shows that the
field shows that the interface is configured in multiple supplicant mode,
Supplicant
Chapter 82: Examples: Access Control Configuration
employee-vlan
data-vlan
voice-vlan
employee-vlan
employee-vlan
default
employee-vlan
default
ge-0/0/2.0 interface is in the authenticator state. The
2587