Defining Cos Drop Profiles (J-Web Procedure); Table 418: Scheduler Maps Configuration Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

Table 418: Scheduler Maps Configuration Fields

Field
Scheduler Map Name
Scheduler Mapping
Related
Documentation

Defining CoS Drop Profiles (J-Web Procedure)

3214
®
OS for EX Series Ethernet Switches, Release 10.3
Function
Specifies the name for a scheduler map.
Allows you to associate a preconfigured
scheduler with a forwarding class.
After scheduler maps have been applied to an
interface, they affect the hardware queues and
packet schedulers.
Defining CoS Schedulers (J-Web Procedure) on page 3211
Defining CoS Schedulers (CLI Procedure) on page 3209
Example: Configuring CoS on EX Series Switches on page 3173
Monitoring CoS Scheduler Maps on page 3231
You can use the J-Web interface to define CoS drop profiles on EX4500 and EX8200
switches.
To configure CoS drop profiles:
Select Configure > Class of Service
1.
NOTE: After you make changes to the configuration in this page, you must
commit the changes immediately for them to take effect. To commit all
changes to the active configuration, select
See Using the Commit Options to Commit Configuration Changes for
details about all commit options.
Click one:
2.
—Adds a drop profile. Enter information into the drop profiles page as described
Add
in Table 419 on page 3215.
—Modifies an existing drop file. Enter information into the drop profiles page as
Edit
described in Table 419 on page 3215.
Delete —Deletes an existing drop profile.
Your Action
To name a map, type the name—for example,
.
be-scheduler-map
To associate a scheduler with a forwarding class,
locate the forwarding class and select the
scheduler in the box next to it.
For example, for the best-effort
class, select the configured scheduler from the
list.
> Drop Profile .
Commit Options
Copyright © 2010, Juniper Networks, Inc.
forwarding
> .
Commit