Disable-Timeout - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

disable-timeout

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
2804
®
OS for EX Series Ethernet Switches, Release 10.3
disable-timeout timeout;
[edit ethernet-switching-options port-error-disable]
Statement introduced in Junos OS Release 9.6 for EX Series switches.
Specify how long the Ethernet-switching interfaces remain in a disabled state due to the
MAC limiting, MAC move liming, or storm control errors.
The disable timeout is not enabled.
—Amount of time, in seconds, that the disabled state remains in effect. The
timeout
disabled interface is automatically restored to service when the specified timeout
is reached.
Range: 10 through 3600 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Port Security (CLI Procedure) on page 2906
Configuring Autorecovery From the Disabled State on Secure or Storm Control Interfaces
(CLI Procedure) on page 2796
Example: Configuring Storm Control to Prevent Network Outages on EX Series Switches
on page 2793
Copyright © 2010, Juniper Networks, Inc.