Figure 52: Topology For Configuration; Table 333: Components Of The Topology - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Table 333: Components of the Topology

Property
Switch hardware
VLAN names
Copyright © 2010, Juniper Networks, Inc.
supplicants before the RADIUS server timeout. Additionally, you can configure the switch
to move supplicants to a specific VLAN if a RADIUS timeout occurs or if the RADIUS
server sends an EAP Access-Reject message. Figure 52 on page 2551 shows the topology
used for this example. The RADIUS server is connected to the EX4200 switch on access
port . The switch acts as the authenticator Port Access Entity (PAE) and
ge-0/0/10
forwards credentials from the supplicant to the user database on the RADIUS server.
The switch blocks all traffic and acts as a control gate until the supplicant is authenticated
by the authentication server. A supplicant is connected to the switch through interface
.
ge-0/0/1

Figure 52: Topology for Configuration

Table 333 on page 2551 describes the components in this topology.
Settings
EX4200 access switch, 24 Gigabit Ethernet ports: 8 PoE ports.
default VLAN
VLAN
vlan-sf
Chapter 82: Examples: Access Control Configuration
2551