Rp-Set; Source - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

rp-set

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

source

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
2404
®
OS for EX Series Ethernet Switches, Release 10.3
rp-set {
address address <forward-msdp-sa>;
}
[edit logical-systems logical-system-name protocols pim local family (inet | inet6)
anycast-pim],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
pim local family (inet | inet6) anycast-pim],
[edit protocols pim local family (inet | inet6) anycast-pim],
[edit routing-instances routing-instance-name protocols pim local family (inet | inet6)
anycast-pim]
Statement introduced in Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure a set of rendezvous point (RP) addresses for anycast RP. You can configure
up to 15 RPs.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring PIM Anycast with MSDP
source {
groups group-prefix;
}
[edit protocols igmp-snooping vlan vlan-number data-forwarding]
Statement introduced in Junos OS Release 9.6 for EX Series switches.
Configure a VLAN to be a multicast source VLAN (MVLAN).
The remaining statement is explained separately.
Disabled.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 56
Example: Configuring Multicast VLAN Registration on EX Series Switches on page 2326
Configuring Multicast VLAN Registration (CLI Procedure) on page 2336
Copyright © 2010, Juniper Networks, Inc.