Chapter 95 Configuring Port Security - Juniper JUNOS OS 10.3 - SOFTWARE Manual

CHAPTER 95
Configuring Port Security
Copyright © 2010, Juniper Networks, Inc.
Configuring Port Security (CLI Procedure) on page 2906
Configuring Port Security (J-Web Procedure) on page 2907
Enabling DHCP Snooping (CLI Procedure) on page 2910
Enabling DHCP Snooping (J-Web Procedure) on page 2911
Enabling a Trusted DHCP Server (CLI Procedure) on page 2912
Enabling a Trusted DHCP Server (J-Web Procedure) on page 2912
Enabling Dynamic ARP Inspection (CLI Procedure) on page 2913
Enabling Dynamic ARP Inspection (J-Web Procedure) on page 2914
Configuring MAC Limiting (CLI Procedure) on page 2915
Configuring MAC Limiting (J-Web Procedure) on page 2917
Configuring MAC Move Limiting (CLI Procedure) on page 2919
Configuring MAC Move Limiting (J-Web Procedure) on page 2921
Setting the none Action on an Interface to Override a MAC Limit Applied to All Interfaces
(CLI Procedure) on page 2922
Configuring IP Source Guard (CLI Procedure) on page 2923
Configuring Static IP Addresses for DHCP Bindings on Access Ports (CLI
Procedure) on page 2925
Setting Up DHCP Option 82 with the Switch as a Relay Agent Between Clients and
DHCP Server (CLI Procedure) on page 2926
Setting Up DHCP Option 82 on the Switch with No Relay Agent Between Clients and
DHCP Server (CLI Procedure) on page 2929
Configuring Proxy ARP (CLI Procedure) on page 2931
Configuring Autorecovery From the Disabled State on Secure or Storm Control Interfaces
(CLI Procedure) on page 2932
2905