Clear Igmp Statistics - Juniper JUNOS OS 10.3 - SOFTWARE Manual

clear igmp statistics

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
clear igmp statistics clear igmp statistics
Copyright © 2010, Juniper Networks, Inc.
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
clear igmp statistics
<interface interface-name>
<logical-system (all | logical-system-name)>
clear igmp statistics
<interface interface-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Clear Internet Group Management Protocol (IGMP) statistics.
—Clear IGMP statistics on all interfaces.
none
interface interface-name —(Optional) Clear IGMP statistics for the specified interface only.
logical-system (all | logical-system-name)
systems or on a particular logical system.
clear
show igmp statistics on page 2454
clear igmp statistics on page 2425
See show igmp statistics for an explanation of output fields.
The following sample output displays IGMP statistics information before and after the
command is entered:
clear igmp statistics
user@host> show igmp statistics
IGMP packet statistics for all interfaces
IGMP Message type Received
Membership Query
V1 Membership Report
DVMRP
PIM V1
Cisco Trace
V2 Membership Report
Group Leave
Mtrace Response
Mtrace Request
Domain Wide Report
V3 Membership Report
Other Unknown types
IGMP v3 unsupported type
IGMP v3 source required for SSM
IGMP v3 mode not applicable for SSM
IGMP Global Statistics
Bad Length
—(Optional) Perform this operation on all logical
Sent Rx errors
8883 459
0 0
19784 35476
18310 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
2425