Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2866

Complete Software Guide for Junos
Table 355: show lldp Output Fields (continued)
Field Name Field Description
How often LLDP trap notifications are generated as a result of LLDP database
Notification interval
changes. If the interval value is 0, LLDP trap notifications of database changes
are disabled.
This value is set by the
statement.
Config Trap Interval How often LLDP trap notifications are generated as a result of changes in
topology—for example, when an endpoint connects or disconnects. If the interval
value is 0, LLDP trap notifications of topology changes are disabled.
This value is set by the
Amount of time the system maintains dynamic topology entries.
Connection Hold timer
This value is set by the
statement.
LLDP-MED operating state. The state can be
LLDP-MED
Number of advertisements sent from a switch to a device, such as a VoIP
LLDP-MED fast start
telephone, when the device is first detected by the switch. These increased
count
advertisements are temporary. After a device and a switch exchange information
and can communicate, advertisements are reduced to one per second.
This value is set by the
Name of the interface for which LLDP configuration information is being reported.
Interface
Name of the aggregated Ethernet interface, if any, to which the interface belongs.
Parent Interface
LLDP operating state. The state can be
LLDP
LLDP-MED operating state. The state can be
LLDP-MED
Neighbor count Total number of new LLDP neighbors detected since the last switch reboot.
Interface Name of the interface that is advertising VLAN information.
Vlan-id VLAN tag associated with the interface sending LLDP frames. If the interface is
not a member of a VLAN, the VLAN ID is advertised as 0.
VLAN name associated with the VLAN ID.
Vlan-name
2770
®
OS for EX Series Ethernet Switches, Release 10.3
lldp-configuration-notification-interval
ptopo-configuration-trap-interval
ptopo-configuration-maximum-hold-time
configuration statement.
fast-start
configuration
configuration statement.
configuration
or .
enabled disabled
or .
enabled disabled
or .
enabled disabled
Copyright © 2010, Juniper Networks, Inc.
Level of Output
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
detail
All levels
detail
detail