Figure 50: Voip Single Supplicant Topology - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
interface are allowed full access without any further authentication. They effectively
"piggyback" on the first supplicant's authentication. For an example of a VoIP single
supplicant topology, see Figure 50 on page 2543 .

Figure 50: VoIP Single Supplicant Topology

If an IP telephone does not support 802.1X, you can configure VoIP to bypass 802.1X and
LLDP-MED and have the packets forwarded to a VoIP VLAN,
Understanding 802.1X and LLDP and LLDP-MED on EX Series Switches on page 2540
Example: Setting Up VoIP with 802.1X and LLDP-MED on an EX Series Switch on
page 2580
Example: Configuring VoIP on an EX Series Switch Without Including 802.1X
Authentication on page 2588
Example: Configuring VoIP on an EX Series Switch Without Including LLDP-MED Support
on page 2594
Chapter 81: 802.1X and MAC RADIUS Authentication Overview
2543