Revert-Interval; Routing-Instance - Juniper JUNOS OS 10.3 - SOFTWARE Manual

revert-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

routing-instance

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
revert-interval interval;
[edit access profile profile-name radius options]
Statement introduced in Junos OS Release 9.1.
Statement introduced in Junos OS Release 9.1 for EX Series switches.
Configure the amount of time the router or switch waits after a server has become
unreachable. The router or switch rechecks the connection to the server when the specified
interval expires. If the server is then reachable, it is used in accordance with the order of
the server list.
—Amount of time to wait.
interval
Range: 0 through 4294967295 seconds
Default: 60 seconds
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Configuring RADIUS Server Options for Subscriber Access
Configuring Authentication and Accounting Parameters for Subscriber Access
routing-instance routing-instance-name;
[edit access radius-server server-address],
[edit access profile profile-name radius-server server-address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure the routing instance used to send RADIUS packets to the RADIUS server.
—Routing instance name.
routing-instance-name
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring the PPP Authentication Protocol
Configuring Authentication and Accounting Parameters for Subscriber Access
Chapter 85: Configuration Statements for Access Control
2719