Show Igmp Interface; Table 308: Show Igmp Interface Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show igmp interface

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 308: show igmp interface Output Fields

Field Name Field Description
Name of the interface.
Interface
State of the interface:
State
Address of the routing device that has been elected to send membership queries.
Querier
How long until the IGMP querier is declared to be unreachable, in seconds.
Timeout
Copyright © 2010, Juniper Networks, Inc.
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
show igmp interface
<brief | detail>
<interface-name>
<logical-system (all | logical-system-name)>
show igmp interface
<brief | detail>
<interface-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display information about Internet Group Management Protocol (IGMP)-enabled
interfaces.
none —Display standard information about all IGMP-enabled interfaces.
—(Optional) Display the specified level of output.
brief | detail
—(Optional) Display information about the specified IGMP-enabled
interface-name
interface only.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
clear igmp membership on page 2422
show igmp interface on page 2453
show igmp interface brief on page 2453
show igmp interface detail on page 2453
Table 308 on page 2451 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
or .
Up Down
—(Optional) Perform this operation on all logical
show igmp interface command.
Level of Output
All levels
All levels
All levels
All levels
2451