Configuring Cos Tail Drop Profiles (Cli Procedure); Table 419: Drop Profiles Configuration Parameters - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Table 419: Drop Profiles Configuration parameters

Field
Drop Profile Name
Drop profile graph
Drop profile values
Related
Documentation

Configuring CoS Tail Drop Profiles (CLI Procedure)

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Function
Specifies the name for a drop profile.
Specifies the drop profile graph type
Specifies values for the following two
parameters of the drop profile: the queue fill
level and the drop probability.
The queue fill level represents a percentage of
the memory used to store packets in relation
to the total amount that has been allocated for
that specific queue.
The drop probability is a percentage value that
correlates to the likelihood that an individual
packet is dropped from the network.
Monitoring CoS Drop Profiles on page 3233
Example: Configuring CoS on EX Series Switches on page 3173
Tail drop is a simple and effective traffic congestion avoidance mechanism. When you
apply this mechanism to manage congestion, packets are dropped when the output
queue is full.
To configure CoS tail-drop profiles, create a drop profile name (
level ( ):
25
[edit class-of-service drop-profiles]
user@switch# set be-dp fill-level 25
Example: Configuring CoS on EX Series Switches on page 3173
Understanding CoS Tail Drop Profiles on page 3159
Chapter 109: Configuring CoS
Your Action
Type the name.
Select one: Segmented or Interpolated
To add new values:
1. Click Add .
2. Enter the fill level.
3. Enter the drop probability.
4. Click .
OK
To edit an existing value, click
the fill level and drop probability.
To delete a value, select it and click
be-dp ) and assign a fill
.
and modify
Edit
.
Delete
3215