Show Vrrp; Table 298: Show Vrrp Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show vrrp

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 298: show vrrp Output Fields

Field Name Field Description
Name of the logical interface.
Interface
Physical interface index number, which reflects its initialization sequence.
Interface index
Total number of VRRP groups configured on the interface.
Groups
Total number of VRRP groups that are active (that is, whose interface state is
Active
either up or down).
Copyright © 2010, Juniper Networks, Inc.
show vrrp
<brief | detail | extensive | summary>
<interface interface-name>
<track interfaces>
Statement introduced in Junos OS Release 10.0 for EX Series switches.
Display information and status about VRRP groups.
none -(Same as brief) Display brief status information about all VRRP interfaces.
brief | detail | extensive | summary
interface interface-name -(Optional) Display information and status about the specified
VRRP interface.
-(Optional) Display information and status about VRRP track interfaces.
track interfaces
view
Configuring VRRP for IPv6 (CLI Procedure) on page 1698
show vrrp on page 2308
show vrrp brief on page 2308
show vrrp detail (IPv6) on page 2308
show vrrp detail (Route Track) on page 2308
show vrrp extensive on page 2309
show vrrp interface on page 2310
show vrrp summary on page 2311
show vrrp track detail on page 2311
show vrrp track summary on page 2311
Table 298 on page 2303 lists the output fields for the
are listed in the approximate order in which they appear.
Chapter 74: Operational Commands for Layer 3 Protocols
-(Optional) Display the specified level of output.
show vrrp
command. Output fields
Level of Output
none, brief, extensive,
summary
extensive
extensive
extensive
2303