Example: Configuring Mac Limiting To Protect The Switch From Dhcp Starvation - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos
Related
Documentation
2918
®
OS for EX Series Ethernet Switches, Release 10.3
Click .
1. Add
Type the allowed MAC address and click
2.
Repeat this step to add more allowed MAC addresses.
Click when you have finished setting MAC limits.
OK
6.
Click OK after the configuration has been successfully delivered.
7.
NOTE: You can enable or disable port security on the switch at any time by
clicking the Activate
page. If security status is shown as
any VLANs or interfaces (ports), a message asking whether you want to
enable port security appears.
Configuring MAC Limiting (CLI Procedure) on page 2915
Example: Configuring Allowed MAC Addresses to Protect the Switch from DHCP
Snooping Database Alteration Attacks on page 2870
Example: Configuring MAC Limiting, Including Dynamic and Allowed MAC Addresses,
to Protect the Switch from Ethernet Switching Table Overflow Attacks on page 2856
Example: Configuring MAC Limiting to Protect the Switch from DHCP Starvation Attacks
on page 2863
Verifying That MAC Limiting Is Working Correctly on page 2937
Setting the none Action on an Interface to Override a MAC Limit Applied to All Interfaces
(CLI Procedure) on page 2922
Understanding MAC Limiting and MAC Move Limiting for Port Security on EX Series
Switches on page 2838
.
OK
or Deactivate button on the Port Security Configuration
when you try to edit settings for
Disabled
Copyright © 2010, Juniper Networks, Inc.