Clear Multicast Bandwidth-Admission - Juniper JUNOS OS 10.3 - SOFTWARE Manual

For ex series ethernet switches
Hide thumbs Also See for JUNOS OS 10.3 - SOFTWARE:
Table of Contents

Advertisement

clear multicast bandwidth-admission

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
clear multicast bandwidth-admission
<group group-address>
<inet | inet6>
<instance instance-name>
<interface interface-name>
<source source-address>
Command introduced in Junos OS Release 8.3.
Command introduced in Junos OS Release 9.0 for EX Series switches.
inet6
and
instance
options introduced in Junos OS Release 10.0 for EX Series switches.
Reapply IP multicast bandwidth admissions.
—Reapply multicast bandwidth admissions for all IPv4 forwarding entries in the
none
master routing instance.
—(Optional) Reapply multicast bandwidth admissions for the specified
group group-address
group.
inet
—(Optional) Reapply multicast bandwidth admission settings for IPv4 flows.
—(Optional) Reapply multicast bandwidth admission settings for IPv6 flows.
inet6
instance instance-name
—(Optional) Reapply multicast bandwidth admission settings for
the specified instance. If you do not specify an instance, the command applies to
the master routing instance.
—(Optional) Examines the corresponding outbound interface in
interface interface-name
the relevant entries and acts as follows:
If the interface is congested, and it was admitted previously, it is removed.
If the interface was rejected previously, the
command enables the interface to be admitted as long as enough bandwidth
exists on the interface.
If you do not specify an interface, issuing the
command readmits any previously rejected interface for the relevant entries as
long as enough bandwidth exists on the interface.
To manually reject previously admitted outbound interfaces, you must specify the
interface.
—(Optional) Use with the
source source-address
bandwidth admission settings for the specified (source, group) entry.
clear
show multicast interface on page 2466
clear multicast bandwidth-admission
clear multicast bandwidth-admission
option to reapply multicast
group
2429

Advertisement

Table of Contents
loading

Table of Contents