Clear Multicast Scope - Juniper JUNOS OS 10.3 - SOFTWARE Manual

clear multicast scope

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
clear multicast scope clear multicast scope
Copyright © 2010, Juniper Networks, Inc.
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
clear multicast scope
<inet | inet6>
<interface interface-name>
<logical-system (all | logical-system-name)>
clear multicast scope
<inet | inet6>
<interface interface-name>
Command introduced in Junos OS Release 7.6.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced in Junos OS Release 10.0 for EX Series switches.
inet6
Clear IP multicast scope statistics.
none —(Same as logical-system all
—(Optional) Clear multicast scope statistics for IPv4 family addresses.
inet
inet6 —(Optional) Clear multicast scope statistics for IPv6 family addresses.
—(Optional) Clear multicast scope statistics on a specific interface.
interface interface-name
logical-system (all | logical-system-name)
systems or on a particular logical system.
clear
show multicast scope on page 2484
clear multicast scope on page 2431
When you enter this command, you are provided feedback on the status of your request.
user@host> clear multicast scope
) Clear multicast scope statistics.
—(Optional) Perform this operation on all logical
2431