Hold-Multiplier - Juniper JUNOS OS 10.3 - SOFTWARE Manual

hold-multiplier

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
hold-multiplier number;
[edit protocols lldp]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify the multiplier used in combination with the advertisement-interval value to
determine the length of time LLDP information is held before it is discarded. The default
value is 4 (or 120 seconds).
Disabled.
—A number used as a multiplier.
number
Range: 2 through 10
Default: 4 (or 120 seconds)
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show lldp on page 2769
Configuring LLDP (CLI Procedure) on page 2622
Understanding 802.1X and LLDP and LLDP-MED on EX Series Switches on page 2540
Chapter 85: Configuration Statements for Access Control
2685