Show Class-Of-Service Classifier; Table 430: Show Class-Of-Service Classifier Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show class-of-service classifier

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
show class-of-service classifier
<name name>
<type dscp | type dscp-ipv6 | type exp | type ieee-802.1 | type inet-precedence>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
For each class-of-service (CoS) classifier, display the mapping of code point value to
forwarding class and loss priority.
none —Display all classifiers.
—(Optional) Display named classifier.
name name
—(Optional) Display all classifiers of the Differentiated Services code point
type dscp
(DSCP) type.
—(Optional) Display all classifiers of the DSCP for IPv6 type.
type dscp-ipv6
type exp —(Optional) Display all classifiers of the MPLS experimental (EXP) type.
—(Optional) Display all classifiers of the ieee-802.1 type.
type ieee-802.1
type inet-precedence —(Optional) Display all classifiers of the inet-precedence type.
view
show class-of-service classifier type ieee-802.1 on page 3278
Table 430 on page 3277 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.

Table 430: show class-of-service classifier Output Fields

Field Name
Classifier
Code point type
Index
Code point
Forwarding class
Chapter 113: Operational Mode Commands for CoS
Field Description
Name of the classifier.
Type of the classifier: (not on EX Series switch),
exp
(not on EX Series switch), ieee-802.1
Internal index of the classifier.
Code point value used for classification
Classification of a packet affecting the forwarding, scheduling, and
marking policies applied as the packet transits the router.
show class-of-service classifier
,
dscp dscp-ipv6
, or inet-precedence .
3277