Show Poe Telemetries Interface; Table 449: Show Poe Telemetries Interface Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show poe telemetries interface

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
3346
®
OS for EX Series Ethernet Switches, Release 10.3
show poe telemetries interface interface-name ( all | n )
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display a history of power consumption on the specified interface.
Telemetries must be enabled on the interface before you can display a history of power
consumption.
interface-name —Display power consumption records for the specified PoE interface.
—Display all power consumption records for the PoE interface.
all
n —Display the specified number of power consumption records for the PoE interface.
The records displayed are the most recent.
view
show poe interface on page 3342
show poe controller on page 3340
Monitoring PoE Power Consumption (CLI Procedure) on page 3320
Verifying PoE Configuration and Status (CLI Procedure) on page 3322
Troubleshooting PoE Interfaces on page 3325
show poe telemetries interface (Last 10 Records) on page 3347
show poe telemetries interface (All Records) on page 3347
Table 449 on page 3346 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.

Table 449: show poe telemetries interface Output Fields

Field Name Field Description
Number of the record for the specified port. Record number 1 is the most recent.
S1 No
Date and time when the power-consumption data was gathered.
Timestamp
Amount of power provided by the specified interface at the time the data was
Power
gathered.
Maximum voltage provided by the specified interface at the time the data was
Voltage
gathered.
show poe telemetries interface
Copyright © 2010, Juniper Networks, Inc.