Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2594

Complete Software Guide for Junos
show pim join show pim join
show pim join instance
2498
®
OS for EX Series Ethernet Switches, Release 10.3
Table 327: show pim join Output Fields (continued)
Field Name Field Description
Information about downstream interfaces:
Downstream
neighbors
Interface
NOTE: A pseudo PIM-SM interface appears for all IGMP-only interfaces.
Interface address
State
Flags
Length of time between assert cycles on downstream interface. Not displayed
Assert Timeout
if assert timer is null.
Time remaining until the downstream join state is updated (in seconds). If the
Timeout
downstream join state is not updated before this keepalive timer reaches zero,
the entry is deleted. If there is a directly connected host,
user@host> show pim join
Instance: PIM.master Family: INET
R = Rendezvous Point Tree, S = Sparse, W = Wildcard
Group: 239.1.1.1
Source: *
RP: 10.255.14.144
Flags: sparse,rptree,wildcard
Upstream interface: Local
Group: 239.1.1.1
Source: 10.255.14.144
Flags: sparse,spt
Upstream interface: Local
Group: 239.1.1.1
Source: 10.255.70.15
Flags: sparse,spt
Upstream interface: so-1/0/0.0
Instance: PIM.master Family: INET6
R = Rendezvous Point Tree, S = Sparse, W = Wildcard
user@host> show pim join instance VPN-A
Instance: PIM.VPN-A Family: INET
R = Rendezvous Point Tree, S = Sparse, W = Wildcard
Group: 235.1.1.2
Source: *
RP: 10.10.47.100
Flags: sparse,rptree,wildcard
Upstream interface: Local
Group: 235.1.1.2
Source: 192.168.195.74
Flags: sparse,spt
Upstream interface: at-0/3/1.0
—Interface name for the downstream neighbor.
—Address of the downstream neighbor.
—Information about the downstream neighbor:
—PIM join flags:
R (RPtree),S (Sparse)
join or prune
, , or
W (Wildcard) zero
Timeout is Infinity
Copyright © 2010, Juniper Networks, Inc.
.
.
.