Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3168

Complete Software Guide for Junos
Table 389: Advanced Options for Terms (continued)
Table Function
Dot 1q user Specifies the user-priority field of the tagged Ethernet packet.
priority User-priority values can be 0–7.
In place of the numeric value, you can specify one of the following text
synonyms (the field values are also listed)
background (1)—Background
best-effort (0)—Best effort
controlled-load (4)—Controlled load
excellent-load (3)—Excellent load
network-control (7)—Network control reserved traffic
standard (2)—Standard or Spare
video (5)—Video
voice (6)—Voice
NOTE: This option is not applicable for a routing filter.
VLAN Specifies the VLAN to be associated with the packet.
NOTE: This option is not applicable for a routing filter.
TCP Flags Specifies one or more TCP flags.
NOTE: TCP flags are supported on ingress ports, VLANs, and router
interfaces.
Fragmentation Specifies the IP fragmentation flags.
Flags
NOTE: Fragmentation flags are supported on ingress ports, VLANs,
and router interfaces.
Dot1q tag Specifies the value for tag field in the Ethernet header. Values can be
from 1 through 4095.
NOTE: This option is not applicable for a routing filter.
Action
Counter name Specifies the count of the number of packets that pass this filter, term,
or policer.
Forwarding class Classifies the packet into one of the following forwarding classes:
assured-forwarding
best-effort
expedited-forwarding
network-control
user-defined
3072
®
OS for EX Series Ethernet Switches, Release 10.3
Your Action
Select a value from the list.
Select the VLAN from the list.
Select the option
TCP Initial
enter a combination of TCP
flags.
Select either the option
is-fragment or enter a
combination of fragment action
flags.
Enter the value.
Enter a value.
Select the option from the list.
Copyright © 2010, Juniper Networks, Inc.
or