Prefix-List - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos
Required Privilege
Level
Related
Documentation
3114
®
OS for EX Series Ethernet Switches, Release 10.3
—(Optional in
match-conditions
conditions to use to make a match. The qualifiers are described in Configuring Match
Conditions in Routing Policy Terms.
policy subroutine-policy-name
The name identifying the subroutine policy can contain letters, numbers, and hyphens
(-) and can be up to 255 characters long. To include spaces in the name, enclose it
in quotation marks (" "). For information about how to configure subroutines, see
Configuring Subroutines in Routing Policy Match Conditions.
policy-name —Name that identifies the policy. The name can contain letters, numbers,
and hyphens (-) and can be up to 255 characters long. To include spaces in the
name, enclose it in quotation marks (" ").
prefix-list prefix-list-name
prefix-list-filter prefix-list-name
is the type of match (see Configuring Prefix List Filters), and
match-type
the action to take if the prefixes match.
route-filter destination-prefix match-type <actions>
to perform an immediate match;
to match,
match-type
is the action to take if the
source-address-filter source-prefix match-type <actions>
addresses in multiprotocol BGP (MBGP) and Multicast Source Discovery Protocol
(MSDP) environments on which to perform an immediate match.
the IPv4 or IPv6 route prefix to match,
Configuring Route Lists), and
—Name that identifies the term.
term term-name
to —(Optional) Match a route based on its destination address or the protocols into which
the route is being advertised.
—(Optional) Actions to take on matching routes. The actions are described in
then
Configuring Flow Control Actions and Configuring Actions That Manipulate Route
Characteristics.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Defining Routing Policies
Configuring Routing Policies and Policy Objects in the Dynamic Database
dynamic-db on page 3102
statement; required in
from
—Use another policy as a match condition within this policy.
—Name of a list of IPv4 or IPv6 prefixes.
—Name of a prefix list to evaluate using qualifiers;
—(Optional) List of routes on which
destination-prefix
is the type of match (see Configuring Route Lists), and
destination-prefix matches.
match-type
is the action to take if the
actions
statement) One or more
to
actions
is the IPv4 or IPv6 route prefix
actions
—(Optional) Unicast source
source-prefix
is the type of match (see
matches.
source-prefix
Copyright © 2010, Juniper Networks, Inc.
is
is