Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2867

Table 355: show lldp Output Fields (continued)
Field Name Field Description
Basic TLVs supported on the switch:
LLDP basic TLVs
supported
802.3 TLVs supported on the switch:
Supported LLDP 802
TLVs
Copyright © 2010, Juniper Networks, Inc.
—TLV that advertises the MAC address associated with the
Chassis identifier
local system.
—TLV that advertises the port identification for the specified
Port identifier
port in the local system.
—TLV that advertises the user-configured port description.
Port description
—TLV that advertises the user-configured name of the local
System name
system.
System description —TLV that advertises the system description containing
information about the software and current image running on the system.
This information is taken from the software and is not configurable.
—TLV that advertises the primary functions performed
System capabilities
by the system—for example, bridge or router.
Management address —TLV that advertises the IP management address of
the local system.
MAC/PHY configuration status
physical interface, such as autonegotiation status and support and MAU type.
The information is based on the physical interface structure and is not
configurable.
—TLV that advertises MDI power support, PSE power pair, and
Power via MDI
power class information.
—TLV that advertises if the interface is aggregated and its
Link aggregation
aggregated interface ID.
—TLV that advertises the maximum transmission unit
Maximum frame size
(MTU) of the interface sending LLDP frames.
—TLV that advertises the VLAN tag configured on the interface.
Port VLAN tag
—TLV that advertises the VLAN name configured on the
Port VLAN name
interface.
Chapter 86: Operational Commands for 802.1X
—TLV that advertises information about the
Level of Output
detail
detail
2771