Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2898

Complete Software Guide for Junos
action-shutdown
Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
2802
®
OS for EX Series Ethernet Switches, Release 10.3
action-shutdown;
[edit ethernet-switching-options storm-control]
Statement introduced in Junos OS Release 9.6 for EX Series switches.
Shut down or disable interfaces when the storm control level is exceeded, as follows:
If you set both the
action-shutdown
interfaces are disabled temporarily and recover automatically when the disable timeout
expires.
If you set the
action-shutdown
statement, the interfaces that are enabled for storm control are shut down when the
storm control level is exceeded and they do not recover automatically from that
port-error condition. You must issue the
to clear the port error and restore the interfaces to service.
The option is not enabled. When the storm control level is exceeded,
action-shutdown
the switch drops unknown unicast and broadcast messages on the specified interfaces.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
port-error-disable on page 2811
disable-timeout on page 2804
clear ethernet-switching port-error
Example: Configuring Storm Control to Prevent Network Outages on EX Series Switches
on page 2793
Configuring Autorecovery From the Disabled State on Secure or Storm Control Interfaces
(CLI Procedure) on page 2796
Understanding Storm Control on EX Series Switches on page 2791
and the
port-error-disable
statement and do not the specify the
clear ethernet-switching port-error
Copyright © 2010, Juniper Networks, Inc.
statements, the
port-error-disable
command