Show Multicast Scope; Table 322: Show Multicast Scope Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show multicast scope

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
2484
®
OS for EX Series Ethernet Switches, Release 10.3
show multicast scope
<inet | inet6>
<instance instance-name>
<logical-system (all | logical-system-name)>
show multicast scope
<inet | inet6>
<instance instance-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
and options introduced in Junos OS Release 10.0 for EX Series switches.
inet6 instance
Display administratively scoped IP multicast information.
none —Display standard information about administratively scoped multicast information
for all supported address families in all routing instances.
—(Optional) Display scoped multicast information for IPv4 or IPv6 family
inet | inet6
addresses, respectively.
—(Optional) Display administratively scoped information for a
instance instance-name
specific multicast instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show multicast scope on page 2485
show multicast scope inet on page 2485
show multicast scope inet6 on page 2485
Table 322 on page 2484 describes the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 322: show multicast scope Output Fields

Field Name
Scope name
Group Prefix
Interface
Resolve Rejects
—(Optional) Perform this operation on all logical
Field Description
Name of the multicast scope.
Range of multicast groups that are scoped.
Interface that is the boundary of the administrative scope.
Number of kernel resolve rejects.
command.
show multicast scope
Copyright © 2010, Juniper Networks, Inc.