Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2851

Table 350: show captive-portal interface Output Fields (continued)
Field Name Field Description
The state of the interface:
State
Authenticated
permitted access through server fail fallback.
Authenticating
Connecting
Initialize
Held —An action has been triggered through server fail fallback during a RADIUS server timeout.
A supplicant is denied access, permitted access through a specified VLAN, or maintains the
authenticated state granted to it before the RADIUS server timeout occurred.
The MAC address of the connected client on the interface..
MAC address
Users connected to the captive portal interface.
User
Supplicant mode Mode used to authenticate clients—multiple, single, or single-supplicant.
Number of times the user can attempt to submit authentication information.
Number of retries
Time, in seconds, after a user exceeds the maximum number of retries before they can attempt to
Quiet period
authenticate.
Time, in seconds, that a client can be idle before the session expires.
Configured CP
session timeout
Server timeout Time, in seconds, that an interface will wait for a reply when relaying a response from the client to
the authentication server before timing out and invoking the server-fail action.
Number of Number of users connecting through the captive portal interface. Information for each user includes:
connected
Supplicant
supplicants
Operational state
Dynamic CP session timeout
for this user, if any.
CP Session expiration due in
show captive-portal show captive-portal
user@switch> show captive-portal interface
Captive Portal Information:
interface interface
Interface
ge-0/0/1.0
ge-0/0/10.0
show captive-portal
user@switch> show captive-portal interface detail
ge-0/0/1.0
interface detail
Copyright © 2010, Juniper Networks, Inc.
—The client has been authenticated through the RADIUS server or has been
—The client is authenticating through the RADIUS server.
—Switch is attempting to contact the RADIUS server.
—The interface link is down.
—User name and MAC address.
—See State (above).
—Timeout value dynamically downloaded from the RADIUS server
—Time remaining in session.
State
Connecting
Connecting
Supplicant mode: Multiple
Number of retries: 10
Quiet period: 60 seconds
Configured CP session timeout: 3600 seconds
Server timeout: 15 seconds
Number of connected supplicants: 0
Chapter 86: Operational Commands for 802.1X
MAC address User
00:30:48:8c:66:bd No User
Level of Output
All levels
brief
brief
detail
detail
detail
detail
detail
detail
2755