Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3303

Table 415: Classifiers Configuration Fields (continued)
Field
Code Point Mapping
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Function
Sets the forwarding classes and the packet loss
priorities (PLPs) for specific CoS values and
aliases.
Defining CoS Classifiers (CLI Procedure) on page 3204
Example: Configuring CoS on EX Series Switches on page 3173
Monitoring CoS Classifiers on page 3227
Understanding CoS Classifiers on page 3153
Chapter 109: Configuring CoS
Your Action
To add a code point mapping:
1. Click .
Add
2. Select the code point.
3. Select a forwarding class from the following
list:
expedited-forwarding—Provides low
loss, low delay, low jitter, assured
bandwidth, and end-to-end service.
Packets can be forwarded out of sequence
or dropped.
best-effort—Provides no special CoS
handling of packets. Typically, RED drop
profile is aggressive and no loss priority is
defined.
assured-forwarding—Provides high
assurance for packets within the specified
service profile. Excess packets are
dropped.
network-control—Packets can be
delayed but not dropped.
4. Select the loss priority.
To assign a loss priority, select one:
high—Packet has a high loss priority.
low—Packet has a low loss priority.
3207