Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3188

Complete Software Guide for Junos
Table 393: Firewall Filter Statements That Are Not Supported by Junos OS for EX Series Switches
Statements Not Supported
interface-set interface-set-name {
}
load-balance-group group-name {
}
three-color-policer name {
}
logical-interface-policer;
single-rate {
}
two-rate {
}
prefix-action name {
}
prefix-policer {
}
service-filter filter-name {
}
simple-filter simple-filter-name {
}
accounting-profile name;
logical-bandwidth-policer;
logical-interface-policer;
bandwidth-percent number;
Related
Documentation
3092
®
OS for EX Series Ethernet Switches, Release 10.3
Firewall Filter Match Conditions and Actions for EX Series Switches on page 3009
Example: Configuring Firewall Filters for Port, VLAN, and Router Traffic on EX Series
Switches on page 3039
Configuring Firewall Filters (CLI Procedure) on page 3063
Configuring Policers to Control Traffic Rates (CLI Procedure) on page 3073
Firewall Filters for EX Series Switches Overview on page 3001
Statement Hierarchy Level
[edit firewall]
[edit firewall family family-name]
[edit firewall family family-name filter filter-name]
[edit firewall policer policer-name]
[edit firewall policer policer-name if-exceeding]
Copyright © 2010, Juniper Networks, Inc.