Clear Pim Register - Juniper JUNOS OS 10.3 - SOFTWARE Manual

clear pim register

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
clear pim register clear pim register
Copyright © 2010, Juniper Networks, Inc.
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
clear pim register
<inet | inet6>
<instance instance-name>
<interface interface-name>
<logical-system (all | logical-system-name)>
clear pim register
<inet | inet6>
<instance instance-name>
<interface interface-name>
Command introduced in Junos OS Release 7.6.
Command introduced in Junos OS Release 9.0 for EX Series switches.
and options introduced in Junos OS Release 10.0 for EX Series switches.
inet6 instance
Clear Protocol Independent Multicast (PIM) register message counters.
none—Clear PIM register message counters for all family addresses, instances, and
interfaces.
—(Optional) Clear PIM register message counters for IPv4 or IPv6 family
inet | inet6
addresses, respectively.
instance instance-name —(Optional) Clear register message counters for a specific
PIM-enabled routing instance.
—(Optional) Clear PIM register message counters for a specific
interface interface-name
interface.
logical-system (all | logical-system-name)
systems or on a particular logical system.
The clear pim register command cannot be used to clear the PIM register state on a
backup Routing Engine when nonstop active routing is enabled.
clear
show pim statistics on page 2512
clear pim register on page 2435
When you enter this command, you are provided feedback on the status of your request.
user@host> clear pim register
—(Optional) Perform this operation on all logical
2435