Show Class-Of-Service Interface; Table 434: Show Class-Of-Service Interface Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show class-of-service interface

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields

Table 434: show class-of-service interface Output Fields

Field Name Field Description
Physical interface Name of a physical interface.
Index Index of this interface or the internal index of this object.
Dedicated Queues Status of dedicated queues configured on an interface. Supported on Trio MPC/MIC interfaces on
MX Series routers only.
Number of queues you can configure on the interface.
Queues supported
Number of queues currently configured.
Queues in use
Number of queues created in addition to the default queues. Supported on Trio MPC/MIC interfaces
Total non-default
on MX Series routers.
queues created
Maximum transmission rate on the physical interface. You can configure the shaping rate on the
Shaping rate
physical interface, or on the logical interface, but not both. Therefore, the
for the physical interface or the logical interface, but not both.
Scheduler map Name of the output scheduler map associated with this interface.
Input shaping rate For Gigabit Ethernet IQ2 PICs, maximum transmission rate on the input interface.
Copyright © 2010, Juniper Networks, Inc.
show class-of-service interface
<interface-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Forwarding class map information added in Junos OS Release 9.4.
Display the logical and physical interface associations for the classifier, rewrite rules, and
scheduler map objects.
—Display class of service (CoS) associations for all physical and logical interfaces.
none
interface-name —(Optional) Display CoS associations for the specified interface.
view
show class-of-service interface (Physical) on page 3286
show class-of-service interface (Logical) on page 3286
show class-of-service interface (Gigabit Ethernet) on page 3287
Table 434 on page 3285 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.
Chapter 113: Operational Mode Commands for CoS
show class-of-service interface
Shaping rate
field is displayed
3285