Country-Code - Juniper JUNOS OS 10.3 - SOFTWARE Manual

country-code

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
country-code code;
[edit protocols lldp-med interface (all | interface-name)]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For Link Layer Discovery Protocol–Media Endpoint Device (LLDP-MED), configure the
two-letter country code to include in the location information. Location information is
advertised from the switch to the MED, and is used during emergency calls to identify
the location of the MED. The country code is required when configuring LLDP-MED based
on location.
Disabled.
—Two-letter ISO 3166 country code in capital ASCII letters; for example, US or DE.
code
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show lldp on page 2769
Example: Setting Up VoIP with 802.1X and LLDP-MED on an EX Series Switch on
page 2580
Configuring LLDP-MED (CLI Procedure) on page 2624
Chapter 85: Configuration Statements for Access Control
2667