Clear Firewall - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

clear firewall

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
clear firewall all clear firewall all
3122
®
OS for EX Series Ethernet Switches, Release 10.3
clear firewall (all | counter counter-name | filter filter-name | logical-system
logical-system-name)
clear firewall (all | counter counter-name | filter filter-name)
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
logical-system option introduced in Junos OS Release 9.3.
Clear statistics about configured firewall filters.
NOTE: The
clear firewall
Engine filter counters on a backup Routing Engine that is enabled for GRES.
all —Clear the packet and byte counts for all filters.
—Clear the packet and byte counts for a filter counter that has been
counter counter-name
configured with the counter firewall filter action.
filter filter-name —Clear the packet and byte counts for the specified firewall filter.
logical-system logical-system-name
logical system.
clear
show firewall on page 3124
clear firewall all on page 3122
When you enter this command, you are provided feedback on the status of your request.
user@host> clear firewall all
command cannot be used to clear the Routing
—Clear the packet and byte counts for the specified
Copyright © 2010, Juniper Networks, Inc.