Quiet-Period (Captive Portal) - Juniper JUNOS OS 10.3 - SOFTWARE Manual

quiet-period
Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation

quiet-period (Captive Portal)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
quiet-period seconds;
[edit protocols dot1x authenticator interface (all | [interface-names])]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For 802.1X authentication, configure the number of seconds the interface remains in the
wait state following a failed authentication attempt by a supplicant before reattempting
authentication.
60 seconds
—Number of seconds the interface remains in the wait state.
seconds
Range: 0 through 65,535 seconds
Default: 60 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show network-access aaa statistics authentication on page 2787
Example: Connecting a RADIUS Server for 802.1X to an EX Series Switch on page 2545
quiet-period seconds;
[edit services captive-portal interface (all | interface-names)]
Statement introduced in Junos OS Release 10.1 for EX Series switches.
Configure time, in seconds, after a user exceeds the maximum number of retries before
they can attempt to authenticate.
seconds —Number of seconds.
Range: 1–65535
Default: 60
routing—To view this statement in the configuration.
routing–control—To add this statement to the configuration.
Example: Setting Up Captive Portal Authentication on an EX Series Switch on page 2602
Configuring Captive Portal Authentication (CLI Procedure) on page 2628
Chapter 85: Configuration Statements for Access Control
2709