Maximum-Power - Juniper JUNOS OS 10.3 - SOFTWARE Manual

maximum-power

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
maximum-power watts;
[edit poe interface (all | interface-name)]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Set the maximum amount of power that the switch can supply to the PoE port.
NOTE: Although you can set this value when PoE power management is in
class mode, it does not establish the maximum power for the port. Instead,
the IEEE 802.3af (PoE) or IEEE 802.3at (PoE+) class of the connected device
determines the maximum power for the port.
watts —The maximum number of watts that can be supplied to the port.
Range: 0.0 through 15.4 for switches that support IEEE 802.3af (PoE) and 0.0 through
30.0 for switches that also support IEEE 802.3at (PoE+)
Default: 15.4 for switches that support IEEE 802.3af (PoE) and 30.0 for switches that
support IEEE 802.3at (PoE+)
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Example: Configuring PoE Interfaces with Different Priorities on an EX Series Switch
on page 3309
Configuring PoE (CLI Procedure) on page 3315
Chapter 119: Configuration Statements for PoE
3335