Show Class-Of-Service; Table 429: Show Class-Of-Service Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show class-of-service

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 429: show class-of-service Output Fields

Field Name Field Description
Forwarding class The forwarding class configuration:
Forwarding class
ID
Queue
Fabric Priority
The fabric priority determines which CoS ingress queues packets are sent to.
Code point type The type of code-point alias:
dscp
ieee–802.1
inet-precedence
exp
Names given to CoS values.
Alias
Bit pattern Set of bits associated with an alias.
Classifier Name of the classifier.
3272
®
OS for EX Series Ethernet Switches, Release 10.3
show class-of-service
Command introduced in Junos OS Release 9.0 for EX Series switches.
EXP classifiers added in Junos OS Release 10.1 for EX Series switches.
Display the class-of-service (CoS) information.
view
Example: Configuring CoS on EX Series Switches on page 3173
Monitoring CoS Value Aliases on page 3233
Monitoring CoS Classifiers on page 3227
Monitoring CoS Forwarding Classes on page 3228
Monitoring CoS Scheduler Maps on page 3231
Monitoring CoS Rewrite Rules on page 3230
show class-of- service on page 3273
show class-of-service rewrite-rule on page 3276
Table 429 on page 3272 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
—Name of the forwarding class.
—Forwarding class ID.
—Queue number.
—(EX8200 switches only) Fabric priority: either
—Aliases for DiffServ code point (DSCP) values.
—Aliases for IEEE 802.1p values.
—Aliases for IP precedence values.
—Aliases for experimental (EXP) values.
show class-of-service command.
Level of Output
All levels
or .
high low
All levels
All levels
All levels
All levels
Copyright © 2010, Juniper Networks, Inc.