Vlan - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

vlan

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2742
®
OS for EX Series Ethernet Switches, Release 10.3
vlan (vlan-id | vlan-name | untagged);
[edit ethernet-switching-options voip interface (all | [interface-name | access-ports])
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For EX Series switches, specify the VLAN name or VLAN tag identifier associated with
the VLAN to be sent from the authenticating server to the IP phone.
vlan-name—Name of a VLAN.
vlan-id—The VLAN tag identifier.
Range: 0 through 4095. Tags 0 and 4095 are reserved by Junos OS, and you should not
configure them.
untagged—Allow untagged VLAN traffic.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Setting Up VoIP with 802.1X and LLDP-MED on an EX Series Switch on
page 2580
Example: Configuring VoIP on an EX Series Switch Without Including 802.1X
Authentication on page 2588
Example: Configuring VoIP on an EX Series Switch Without Including LLDP-MED Support
on page 2594
Copyright © 2010, Juniper Networks, Inc.