Classifiers - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
map-name {
forwarding-class class-name scheduler scheduler-name;
}
}
schedulers {
scheduler-name {
buffer-size (percent percentage | remainder);
drop-profile-map loss-priority loss-priority protocol protocol drop-profile profile-name;
priority priority;
shaping-rate (rate | percent percentage);
transmit-rate (rate | percent percentage | remainder);
}
}
}
[edit]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure class-of-service (CoS) parameters on EX Series switches.
The remaining statements are explained separately.
If you do not configure any CoS features, the default CoS settings are used.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Example: Configuring CoS on EX Series Switches on page 3173
Defining CoS Code-Point Aliases (CLI Procedure) on page 3204 or Defining CoS Code-Point
Aliases (J-Web Procedure) on page 3202
Defining CoS Classifiers (CLI Procedure) on page 3204 or Defining CoS Classifiers (J-Web
Procedure) on page 3206
Defining CoS Forwarding Classes (CLI Procedure) on page 3208 or Defining CoS
Forwarding Classes (J-Web Procedure) on page 3208
Configuring CoS Tail Drop Profiles (CLI Procedure) on page 3215
Defining CoS Schedulers (CLI Procedure) on page 3209 or Defining CoS Schedulers
(J-Web Procedure) on page 3211
Defining CoS Rewrite Rules (CLI Procedure) on page 3216 or Defining CoS Rewrite Rules
(J-Web Procedure) on page 3217
Assigning CoS Components to Interfaces (CLI Procedure) on page 3219 or Assigning CoS
Components to Interfaces (J-Web Procedure) on page 3219
Configuring CoS Traffic Classification for Ingress Queuing on 40-port SFP+ Line Cards
(CLI Procedure) on page 3225
Chapter 112: Configuration Statements for CoS
3243