Table 391: Terms Configuration Parameters - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos
Table 390: Policies Global Configuration Parameters (continued)
Field Function
BGP Specifies a BGP community.
Community
AS Path Specifies an AS path. This is
applicable to BGP only.

Table 391: Terms Configuration Parameters

Field Function
Term Name Specifies a term name.
Source tab
Family Specifies an address family protocol.
Routing Instance Specifies a routing instance.
RIB Specifies the name of a routing table.
Preference Specifies the individual preference value for the route.
Metric Specifies a metric value. You can specify up to four metric
values.
Interface Specifies a name or IP address of one or more routing device
interfaces. Do not use this qualifier with protocols that are not
interface-specific, such as internal BGP (IBGP).
3078
®
OS for EX Series Ethernet Switches, Release 10.3
Your Action
To add a BGP community:
1. Click
2. Enter a name for the community.
3. To add a community, click
4. Enter the community ID and click
5. Click
To edit a BGP community, click
To delete a BGP community, select it and click
To add an AS path:
1. Click
2. Enter the AS path name.
3. Enter the regular expression and click
4. Click
To edit an AS path, click
To delete an AS path, select it and click
.
Add
.
Add
OK
OK .
Edit . Edit the settings and click
.
Add
OK .
Edit . Edit the settings and click
Your Action
Type or select and edit the name.
Select a value from the list.
Select a value from the list.
Select a value from the list
Type or select and edit the value.
Type or select and edit the value.
To add an interface, select
Interface
list.
To add an address, select
Select the address from the list.
To remove an interface, select it and click
Remove
Copyright © 2010, Juniper Networks, Inc.
.
OK .
.
Delete
.
OK
OK .
.
Delete
Add >
. Select the interface from the
Add > Address
.
.