Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3439

Table 447: show poe interface Output Fields (continued)
Field Name (All Field Name
Interfaces (Single Interface
Output) Output)
Power Power consumed
consumption
Class Class of power
device
show poe interface show poe interface
show poe interface
ge-0/0/3
Copyright © 2010, Juniper Networks, Inc.
Field Description
Amount of power being used by the interface at the time the command is executed.
IEEE 802.3af (PoE) or IEEE 802.3at (PoE+) class of the powered device. Class 0 is
the default class and is used when the class of the powered device is unknown or no
powered device is connected.
user@switch> show poe interface
Interface Admin status Oper status Max power Priority Power consumption Class
ge-0/0/0 Enabled ON
ge-0/0/1 Enabled ON
ge-0/0/2 Enabled ON
ge-0/0/3 Enabled ON
ge-0/0/4 Enabled ON
ge-0/0/5 Enabled ON
ge-0/0/6 Enabled ON
ge-0/0/7 Enabled ON
user@switch> show poe interface ge-0/0/3
PoE interface status:
PoE interface
Administrative status
Operational status
Power limit on the interface : 7.0W
Priority
Power consumed
Class of power device
Chapter 120: Operational Mode Commands for PoE
15.4W Low
15.4W Low
15.4W Low
15.4W Low
15.4W Low
15.4W Low
15.4W Low
15.4W Low
: ge-0/0/3
: Enabled
: ON
: Low
: 5.3W
: 2
7.9W 0
3.2W 2
3.2W 2
3.2W 2
3.2W 2
3.2W 2
3.2W 2
3.2W 2
3343