Secure-Authentication; Secret - Juniper JUNOS OS 10.3 - SOFTWARE Manual

secret

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

secure-authentication

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
secret password;
[edit system accounting destination radius server server-address],
[edit system accounting destination tacplus server server-address],
[edit system radius-server server-address],
[edit system tacplus-server server-address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure the password to use with the RADIUS or TACACS+ server. The secret password
used by the local router or switch must match that used by the server.
—Password to use; can include spaces included in quotation marks.
password
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring RADIUS Authentication
Configuring TACACS+ Authentication
Configuring TACACS+ System Accounting
Configuring RADIUS System Accounting
secure-authentication (http | https);
[edit services captive-portal]
Statement introduced in Junos OS Release 10.1 for EX Series switches.
Enable HTTP or HTTPS access on the captive portal interface.
http
—Enables HTTP access on the captive portal interface.
http
—Enables HTTPS access on the captive portal interface. HTTPS is recommended.
https
routing—To view this statement in the configuration.
routing–control—To add this statement to the configuration.
Example: Setting Up Captive Portal Authentication on an EX Series Switch on page 2602
Configuring Captive Portal Authentication (CLI Procedure) on page 2628
Chapter 85: Configuration Statements for Access Control
2721